| After-sales Service: | with After Sales Service |
|---|---|
| Warranty: | 1 Year |
| Type: | Sweep and Suck Type |
| Certification: | ISO9000, CCC, EPA, EEC |
| Transmission Type: | Manual |
| Emission Standard: | Euro3, Euro4, Euro5 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Generally speaking, there are three types of street sweeping technologies that are recognized within the street sweeper industry. These technologies can be identified as Mechanical Broom Sweepers, Vacuum Sweepers and Regenerative Air Sweepers. These three fundamental technologies can each have unique variations to the technology that is implemented by a sweeper manufacturer. An example of this would be the "high-efficiency" modification.
Sweepers of all types commonly use gutter brooms to move dirt and debris into the path of the pick-up mechanism of the sweeper. To control fugitive dust, a series of water nozzles are typically used to spray a mist of water around brooms and within the sweeper hopper.
Vacuum Street Sweepers
Vacuum sweepers use an engine powered fan to create suction. Typically, a windrow broom moves dirt into the path of a vacuum nozzle, where dirt and debris are sucked into a hopper. The large volume of the hopper causes the heavier material to fall, while a screen traps lighter material such as leaves, before the air is exhausted. Vacuum sweepers are better at picking up finer material than mechanical sweepers, but share many of the same disadvantages, because the windrow broom is less effective at penetrating cracks and potholes in the street, and the suction nozzle typically only covers about 1/3 of the width of the sweeping path. Vacuum exhaust can also emit a significant amount of dust to the atmosphere.
| Description | Specification | |||
| Automotive chassis | Model,categoryand manufacturer of chassis | DFL1160BX4 | ||
| Model and manufacturer of engine | CUMMINS 190HP | |||
| Rated power of engine | 139kW/2600r/min | |||
| Tire | Front wheel | 9.00R20 steel wire tire | ||
| Rear wheel | 9.00R20 steel wire tire | |||
| Fuel type | Diesel meeting the discharge requirements in the fifth stage, select an appropriate diesel grade according to the temperature |
|||
| Auxiliary engine | Standard configuration | Power | 102kw/2500r/min | |
| Clutch | Single plate, dry type and diaphragm spring | |||
| Fan | Type | Special high-pressure centrifugal fan | ||
| Mode of transmission | Narrow V belt drive | |||
| Hydraulic system | Type | Open type, EHC and centralized control | ||
| Main elements | Gear pump, gerotor motor, hydraulic cylinder, solenoid valve, integrated package, etc. | |||
| Overflow pressure | 14MPa | |||
| Hydraulic oil capacity | 60L | |||
| Electrical system | Control mode | PLC control + manual control, voice alarm, electromechanical liquid interlocking, etc. | ||
| Chassis system voltage | 24V | |||
| Working device system voltage | 12V | |||
| Model of storage battery | Chassis: 12V-70A.H (2 pieces connected in parallel) | |||
| High-pressure cleaning system | High-pressure water pump | Type | Plunger type | |
| Model | Italian Pratissoli KEB36R | |||
| Rated pressure | 10MPa | |||
| System working pressure | 9MPa | |||
| Rated flow | 80L/min | |||
| Rated speed | 1150r/min | |||
| Water valve and control | Type of water valve | High-pressure stainless steel ball valve, 10MPa | ||
| Control mode | Oil cylinder drive, electrical control | |||
| Type of nozzle of water spray rod | High-pressure washing type | |||
| Dust falling system of sweeping plate | Electric water pump and watering nozzle; water filter and water tank shared with the high-pressure cleaning system | |||
Sweeping system |
Type | Two vertical sweeping plates are symmetrically arranged between the front shaft and the rear shaft of the chassis and on both sides of the frame, which are driven by a hydraulic motor. The revolving speed of sweeping plate is adjustable. The left and right vertical sweepers can be independently lifted. | ||
| Diameter of sweeper | Φ850mm | |||
| Speed of sweeping plate | High gear (normal operation gear): 110r/min; intermediate gear: 80r/min; low gear: 60r/min | |||
| Adjustment to dip angle of sweeping plate | Front inclination: 4°-6°; outward inclination: 2°-4° | |||
| Suction nozzle | Type | Double suction ports, built-in long spray lance with a high-pressure nozzle, the body of suction nozzle moves with the pavement. Lifting of the suction nozzle is controlled by the oil cylinder. A spring is used for floating suspension. | ||
| Diameter of sucker | Φ180mm | |||
| Ground clearance of suction nozzle during working | 5~10mm | |||
| Left & right spray lance | Pendulum angle of spray lance | 65° | ||
| Nozzle ground clearance | 340mm | |||
| Total number of nozzles | 8pcs | |||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}