| Customization: | Available |
|---|---|
| Type: | Compactor |
| Certification: | ISO9000, CCC, TS16949, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1- Garbage Compactor Truck is divided into compactor garbage truck, swing arm garbage truck, hook lift garbage truck, roll on roll off garbage truck,bin lift garbage truck,dumper garbage truck,sealed garbage truck,container garbage truck, rear load garbage truck and so on.
2--Easy Full Automatic Operation of Garbage Compactor Truck: computer control system for loading and unloading operations.
3--One Person Operation: Reducing sanitation working, greatly improves the working environment.
4--Double Operation System of waste collection truck: computer control system and manual operation greatly improves the vehicle usage rate.
5--Capacity of waste collection truck: option for 3-20m3 garbage truck,optional for loading capacity from 1ton to 16tons
6--Steering wheel of waste collection truck: right hand drive or left hand drive
7--Emission standard of waste collection truck : option Euro 1,Euro 2,Euro 3,Euro 4,Euro 5 rear loader truck
8--Truck chassis of waste collection truck : option for japanese and chinese brand,such as dongfeng,isuzu,faw,foton,howo,jac,jmc,forland...
The main advantages of Dongfeng D9 compressed garbage truck:
1) The collection method is simple: change the dirty and old appearance of garbage cans all over the streets in the city, and prevent secondary pollution.
2) High compression ratio and large loading capacity: the maximum crushing pressure is 12 tons, and the loading capacity is equal to two and a half times of the same ton of non-compressed garbage.
3) Operation automation: Imported computer control system is adopted, and all loading and unloading operations require one driver to operate, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.
4) Good economy: When the special equipment is working, the computer control system automatically controls the throttle.
5) Dual insurance system: The operating system has dual functions of computer control and manual operation to ensure safety and increase vehicle utilization.
6)Turning mechanism: optional turning mechanism with trash can (or bucket), rear swing arm turning structure, large floor bucket turning structure.
Different design of Garbage Compactor Truck
Structure Details of Garbage Compactor Truck
Production details of Garbage Compactor Truck
| Drive type | 4X2, New condition, LHD | ||
| Vehicle Main Dimensions | (L x W x H)mm | 8600×2500×3250 | |
| Wheel base (mm) | 3950,4500 or 4700 | ||
| Track front/rear mm | 2040/1860 | ||
| F/R Axle-Load | 4500/9000 kg, | ||
| Approach/departure angle | 8/12 | ||
| Weight in KGS | Curb Weight | 9850kg | |
| GVW | 16000kg | ||
| Max. driving speed(km/h) | 98 | ||
| Engine | Brand | Cummins Brand,Diesel ENGINE | |
| Model | B170 33 or B190 33 | ||
| Type | 4-stroke direct injection, 6-cylinder in-line with water cooling, turbo-charging and inter-cooling; | ||
| Horse Power(HP) | 170hp or 190hp | ||
| Emission standard | Euro III or Euro IV | ||
| Gearbox | 6 forwards& 1 reverse | ||
| Clutch | Reinforced diaphragm clutch | ||
| Tire | 9.00R20,9R22.5, 6 pc including 1 spare tire | ||
| Steering Gear | power steering, hydraulic steering with power assistance | ||
| Equipment for Rear Loader Refuse Truck | |||
| Garbage Box Material | Carbon Steel Q235 | ||
| Garbage Box Volume | 10cbm,12cbm or 14cbm | ||
| Body material | Floor plate 5mm and side plate 5mm | ||
| Waste water tank | 200L | ||
| Filling container volume | 500L | ||
| Filling time | 8~10s | ||
| Filling cycle time | 50~60s/time | ||
| Discharge time | 30~40s | ||
| Hydraulic System | Chinese brand,consist of oil pump,oil cylinder,front valve,rear valve,pressure gauge,oil box,filter and pipelines.Front valve controls push panel and strike-off board. | ||
| Push Panel | Used to push and squeeze garbage,works together with the skid way in the box | ||
Pre sale service
--- Technical communication with engineer
--- Factory and workshop visit
--- Designed drawings
After Sale Service
--- Overseas installation and commissioning
--- Overseas and spare parts support
--- Technical and spare parts support
|
Truck According to your request, choose good chassis and refit it to truck.
Upper Body
Customization
Spare Parts on trucks as tank and box. |
Q1: What kinds of garbage trucks I can order from your company?
A: There are various sizes and types of garbage trucks with different functions,you can contact us and tell your request.We will recommend you suitable product.
Q2:: Have you supplied garbage truck to any overseas companies?
A: Yes,with need of garbage waste transport,we offered garbage trucks to many Africa and south-east Asian countries every year,such as ghana,nigeria,philippines,cambodia,myanmar,vietnam,congo,mauritius...
Q3 What about warranty of garbage truck?
A: Equipment warranty is 12 months from the date on which the equipment is applied successfully into operation, or 13 months from the date on which the equipment has been delivered, whichever comes first.
Q4: Where is your factory? How far from Shanghai to your factory?
A: Our factory based in Suizhou city, Hubei province, China. Our overseas marketing office in Wuhan. Wuhan is two hours' plane/five hours' high speed train from Beijing,Shanghai or Guangzhou city,welcome to visit us for factory inspection.We can pick you up WUHAN TIANHE INTERNATIONAL AIRPORT or WUHAN railway station.
Bulk delivery of Rear Loader garbage Truck
Contact Shirley for more details
Ms. Shirley Fu
Sales Director
Hubei Chengli Special Automobile Co., Ltd.
Hubei Weiyu Special Vehicles Co., Ltd.
Factory:Chengli Automobile Industry Park,Suizhou City,Hubei Province,China
Office:Room 2614-2615,Block B,Longyang Time Square,Hanyang District,Wuhan,China
){kind=link}