4 Axles 40m3 Asphalt Bitumen Tank Semi Trailer with Burner Insulation

Product Description

1. Tank material:
a: Internal Tank: Shell 5mm steel Q345B ;  End 6mm steel Q345B
b. Insulation Interlayer: Inflaming 150mm thick Rock wool compressed to 100mm around the internal tank
c. Outer Shell: Covered with stainless steel sheeting. Fastened by stainless steel full circular clamp rings with rubber seal

2. Burner: Italian RIELLO with a special fuel tank 

3. Heating Pipeline: 1 set U shape heating pipe by seamless steel inside the tank body, connected to burner

4. Hydrostatic test: Pressure Testing - hydrostatic 150kpa each compartment 

5. Landing gear: OST landing leg. Lifting capacity 28 ton, static capacity 72 ton.

 

Product Specifications

Tank Body
Effective Volume		40000+(3%~5%)
Material	Internal Tank	Shell 5mm steel Q345B ;  End 6mm steel Q345B
	Insulation Interlayer	Inflaming 150mm thick Rock wool compressed to 100mm around the internal tank
	Outer Shell	Covered with stainless steel sheeting. Fastened by stainless steel full circular clamp rings with rubber seal
Shell finish		Internal tank sandblasted to SA 2.5 and painted epoxy zinc phosphate primer (anti-corrosion),  then covered by insulation fastened by clapping. Logo design as per customer's requirement
Heating Pipeline		1 set U shape heating pipe by seamless steel inside the tank body, connected to burner
Sub-beam		Standard features of a full length "T" shape sub-frame welded to tank bottom
Hydrostatic test		Pressure Testing - hydrostatic 150kpa each compartment
Tank Fittings
Burner		Italian RIELLO with a special fuel tank
Manhole cover		2-off Φ500 easy-open type manhole cover
Breather Valve (safety valve)		2-off aluminum breather valves
Discharge valve		1-off 4'' outlet with 4'' cam-in groove adaptor at rear of tank
Temperature Gauge		2-off measurement range 0ºC~300ºC
Interlock system		1-off,  the brake is locked when master switch is pulled
Hose and hose carrier box		1 nos (LHS) and 1 nos (RHS) hose carrier to fit 4" x 6 meter hose close type complete brackets to be installed at discharge side. Hose with coupling at one end.
Running Gear
Main Beam		Submerged-arc welding "I" beam mounted to the tank body
Kingpin / plate		12mm thick high tensile steel skid plate bolts directly to the double web reinforced under frame at front completed with bolted kingpin.   c/w 3.5" kingpin
Landing gear		JOST landing leg. Lifting capacity 28 ton, static capacity 72 ton.
Axle		FUWA 4 axles * 13 tons capacity
Suspension		Mechanical Reinforced Multi Leaf Spring. Suspension frame Mild steel fabricated for heavy duty usage
Brake system		Two line air-brake systems comprising of emergency relay valve, 30/30 spring brake chamber on one axle, air reservoir and contact type couplings. With 4S/2M ABS
Tires		17pcs 315/80R22.5 tubeless tires, TRIANGLE brand, include 1 spare
Rims		17pcs 9.00*22.5 steel tubeless rims, include 2 spare rim
Others
Walkway		Anti-skid walkway fitted with carbon steel grating
Ladder		Detachable steel fabricated with steps not more than 300mm, mounted at the front of tank. Clearance between ladder and tanker end not less than 100mm
Handrail		Aluminum manual operated collapsible handrail fixed on the top of tank, 800mm height
Tool box		1 off lockable tool box to be position at passenger side of tanker
Side guard		Side Guard be provided made of steel material on both side of the tanker with guard clearance of 450- 550mm
Mudguard		Whole piece of 2.0 mm minimum steel plates type c/w mud flaps, suppressor and clips
Rear bumper		Steel bumper to accommodate light assembly and number plates to cover full width of the tank. Maximum ground clearance shall be 450mm-550mm and 150mm from near most of tank
Extra Fuel Carrier		1000Liters extra fuel tank attached under tank position
Fire extinguisher holder		2-off x8KGS dry powder fire extinguisher
Anti-Static System		1-off earthing strip to be installed at the rear of tanker. 1-off grounding bonding reel (copper / brass clamp).
Light & Wiring		Standard front, side and rear. Comply with the road regulations and oil industry standard. 24 volt system, 7 wires ISO socket. Red/brake, white/reverse and amber/direction indicator, LED tail lamp 8pcs side marker lamp
Reflective tapes & sticker		Standard or as per customers requirements
Reverse alarm		24V audible reverse beeper

Reference photos

It used for transporting heated bitumen, emulsified bitumen and modified asphalt.
A pump is optional to discharge the bitumen outside. Under the strict inspection by goverments, it is tesed by air, water, X-ray. 

 Factory information
 
Overseas exhibition
 
Company certificate                                                                       

Successful Cases

After-sale service

a. Before purchasing:

1-Quick reply on customers' inquiry;

2-Professional suggestion on truck choice according to different countries.

3-Details quotation with spec.and reasonable price.

4-Welcome to visit our company before purchasing.

b. After purchasing:

1-Production pictures and video updated every week.

2-Customer can visit factory after truck completion or arrange third party inspection.

c. After-sales service:

1-English Operation Video

2-Free operation and technical train at factory but not include accommodation

3-Spare parts supplied at factory price whenever needed.

4-Engineers can be sent to your country and offer local engineering support and train.